Tiling System
SAMTILE® GP, conforming to IS 15477: 2019, Type 1.A product with License for use of BIS / ISI Certification Mark. It also complies with C1 class of tile adhesive is a general purpose Adhesive for thin-bed installation of tiles with apparent porosity of above 3% on cement-based surface / substrate. It is also recommended for tile-on-tile application.
Packing
20-kg HDPE bags
Form
Powder
Coverage
25 -30 Sq.ft/ Bag (Consider 6mm X 6mm Notch Trowel)
Color
Grey
Safety
Use gloves, protective clothing,
goggles & protective gear
• Mix thoroughly 20-kg of SAMTILE® GP with 5.0 ltrs of water till it becomes homogenous
•SAMTILE® GP is ready for application
• Provides excellent adhesion to tiles
• Excellent resistance to water and froste
• Easy to use in bedding mortar or wall cladding
•Tiles to be fixed: Clay, ceramic & vitrified tiles of size below 300mm x 300mm
• Surface / substrate to be applied on: Cement plaster, cement concrete, cement screed & for tile-on-tile application
•Area of Application: Interior dry area floors and vertical walls
Tiling System
SAMTILE® AM, conforming to IS 15477:2019, Type 2, a product with License for use of BIS / ISI Certification Mark, It also complies with C2T class of tile adhesive is a special purpose Adhesive for thin-bed installation of tiles with apparent porosity of below 3% on all interior & exterior floor & wall even in wet, submerged condition. It is also recommended for tile-on-tile application.
Packing
20-kg HDPE bags
Form
Powder
Coverage
25 -30 Sq.ft/ Bag (Consider 6mm X 6mm Notch Trowel)
Color
Grey / White
Safety
Use gloves, protective clothing,
goggles & protective gear
• Mix thoroughly 20-kg of SAMTILE® AM with 5.0 ltrs of water till it becomes homogenous
• SAMTILE® AM is ready for application
• Provides excellent adhesion to tiles
• Easy to use in bedding mortar or wall cladding
•Tiles & Stones to be fixed: Vitrified tiles, glass mosaic, stones of size above 300mm x 300mm
• Surface / substrate to be applied on: Cement plaster, cement concrete, cement screed & for tile-on-tile application
• Area of Application: Interior & exterior floor & wall even in wet, submerged condition
Tiling System
SAMTILE® AM3, conforms to IS 15477:2019, Type 3, T. It also complies with C2TE class of tile adhesive is a high strength adhesive and is suitable for tiles and stone-tiles of any size on exterior wall substrates, like plaster and concrete. It is used in thin bed method for installation of all types of tiles and natural stone-tiles.
Packing
20-kg HDPE bags
Form
Powder
Coverage
25 -30 Sq.ft/ Bag (Consider 6mm X 6mm Notch Trowel)
Color
Grey / white
Safety
Use gloves, protective clothing,
goggles & protective gear
-
• Take the entire pack of 20-kg SAMTILE®AM3. Add 5.0 ltrs of water and mix properly with a mixing machine.
-
• Apply it on the substrate with a square-notch trowel in thin-bed method for installation of all types of tiles and natural stone-tiles.
-
• Substrates like plaster and concrete should be dust-free and saturated with water.
• A high-strength adhesive
• This adhesive is used mainly for tiles and stone-tiles which are included in Type 1 and Type 2 adhesives, but is with enhanced properties of Slip Resistance and Extended Open Time necessary for fixing large tiles and stones mostly on concrete and plaster surface in interior and exterior applications.
• SAMTILE ® AM3 is used for laying all types and formats of Ceramic, Vitrified, Clay Bricks, Basalt, Glass- Mosaic and Porcelain Tiles and natural stone-tiles.
Tiling System
SAMTILE®AMF, conforms to IS 15477:2019, Type 4, T, S1 is a high strength adhesive and It also complies with C2TE S1 class of tile adhesive and hence takes deformation greater than 2.5mm. It is suitable for tiles and stone-tiles of any size on exterior wall substrates and dry wall-board substrates. It is used in thin bed method for installation of all types of tiles and natural stone-tiles.
Packing
20-kg HDPE bags
Form
Powder
Coverage
25 -30 Sq.ft/ Bag (Consider 6mm X 6mm Notch Trowel)
Color
Grey / white
Safety
Use gloves, protective clothing,
goggles & protective gear
• Take the entire pack of 20-kg SAMTILE® AMF. Add 5.0 ltrs of water and mix properly with a mixing machine.
• Apply it on the substrate with a square-notch trowel in thin-bed method for installation of all types of tiles and natural stone-tiles.
• Substrates like plaster and concrete should be dust-free and saturated with water.
SAMTILE ® AMF is ideal for tiles and stones of any size to be installed on exterior wall-substrates, like plaster and concrete, and dry wall-board substrates, like Gypsum-boards, Plywood, Wood, Calcium Silicate Boards, medium density fiber boards, fiber cement boards, bison, panel etc.
• A high-strength adhesive with extended open time and slip resistance
• For tiles and stone-tiles which are included in Type 1, Type 2 and Type 3 adhesives, but is also intended for installation on dry wall-board substrates
Tiling System
SAMTILE® AMF2, conforms to IS 15477:2019, Type 4, T, S2 is a high strength adhesive and It is C2TE S2 class of tile adhesive and hence takes deformation greater than 5.0 mm. It is suitable for tiles and stone-tiles of any size on exterior wall substrates and dry wall-board substrates. It is used in thin-bed method for installation of all types of tiles and natural stone-tiles.
Packing
20-kg HDPE bags
Form
Powder
Coverage
25 -30 Sq.ft/ Bag (Consider 6mm X 6mm Notch Trowel)
Color
Grey / white
Safety
Use gloves, protective clothing,
goggles & protective gear
• Take the entire pack of 20-kg SAMTILE® AMF2. Add 5.0 ltrs of water and mix properly with mixing machine.
• Apply on the substrate with a square-notch trowel in thin-bed method for installation of all types of tiles and natural stone-tiles.
• Substrates like plaster and concrete should be dust-free and saturated with water.
• A high-strength adhesive
• For tiles and stone-tiles which are included in Type 1, Type 2 and Type 3 adhesives, but is also intended for installation on dry wall-board substrates
• SAMTILE® AMF2 is ideal for tiles and stones of any size to be installed on exterior wall-substrates, like plaster and concrete, and dry wall-board substrates, like Gypsum-boards, Plywood, Wood, Calcium Silicate Boards, medium density fiber boards, fiber cement boards, bison, panel etc.
Tiling System
SAMTILE® EP is reactive, improved, adhesive with no vertical slip, flexible epoxy adhesive for tile and stones.
Packing
5.5 kg ( Part I – 3 kg, Part II – 2.5 kg )
Form
Part I – Liquid
Part II – Liquid
Base
Epoxy
Color
White
Safety
Use protective gloves
• Take part 2 (hardener) in part 1 (base), and mix properly with a mixing machine. .
• Apply it on the substrate with a square-notch trowel in thin-bed method for installation of all types of tiles and natural stone-tiles.
• Substrates like plaster and concrete should be dust-free and dry.
• SAMTILE® EP is ideal for tiles and stones of any size to be installed on exterior wall-substrates, like plaster and concrete, and dry wall-board substrates, like Gypsum-boards, Plywood, Wood, Calcium Silicate Boards, medium density fiber boards, fiber cement boards, bison, panel etc.
• Bonding of all types and forms of tiles and stones
• Bonding tiles, stones, metal tiles etc on dry wall boards like plywood, wood, gypsum or cement boards, bison panels etc.
Tiling System
SAMTILE® JM is ready to use joint filling mortar based on cement and special additives. It is victual-proof.
Packing
1-kg pouch x 12 (in one colour)
Form
Powder
Base
Cement
Color
White, Ivory, Jaisalmer, Brown, Sky- Blue,
Grey, Dark-Grey, Jet-Black
(for more colours refer the shade card)
Safety
Use protective gloves
• Mix 1-kg of SAMTILE® JM with approximate 0.3 litre of Water.
• Stir again after 15 minutes
• SAMTILE® JM is applied by means of a rubber-trowel diagonal to the joint.
• Clean by means of a soft sponge and water for 5-15 minutes after application.
• SAMTILE ® JM is used for filling joints up to 7mm, between ceramic tiles, panels, mosaic for walls, floors, indoors and outdoors.
• It is victual-proof.
• To increase plasticity, elasticity, water resistance and adherence of SAMTILE ® JM, use a special synthetic dispersion SAMTILE ® AE.
• Filling joints between ceramic tiles, panels, mosaics for walls, floors, indoors and out doors.
Tiling System
SAMTILE® JME is a three component solid epoxy grout used for joints from 2 to 15 mm on floorings and walls, glass mosaic, ceramic tile, vitrified tile, marble and stone. SAMTILE® JME ensures the lasting chemical and mechanical performance of high resistance coverings. Sealed membrane is hard wearing, hygienic yet attractive in cosmetic finish. Available in various shades.
Packing
1 Kg and 5 Kg
Form
Part 1 – Liquid
Part 2 – Liquid
Part 3 – Colour fillers
Base
Epoxy
Color
White, Ivory, Jaisalmer, Brown, Sky-Blue,
Grey, Dark-Grey, Jet-Black
(for more colours refer the shade card)
Safety
Use protective gloves
