.
SAMBOND® CF is a one component (Ready to use), flexible crack filling compound recommended for repair in concrete.
SAMPLAST®-WR-100, as a water reducing and accelerating admixture, is formulated to meet the highest level of quality standard that prevailed in the international market.
Advantages :
➤It is a water reducing high performance super plasticizer
➤High water reduction on minimum dosage
➤Attains high early strength
➤High workability extends time for concrete placement
➤Ideal for all structural concrete where improved density and gravity are required
➤Can be used as retarding water reducing plasticizing admixture at higher dosage
➤Reduces porosity
Method of Use :
➤Add SAMPLAST®-WR-100 (100 gm - 400 gm per 50 kg of cement) in water and stir gently
➤Add dry mix to the solution while mixing
Recommended Applications :
➤RCC load bearing structures like beams and columns
➤Building foundations and footings
➤RCC support structures for overhead water tanks, revolving restaurants etc
➤High-rise towers for installation of radar systems, TV signal receivers, search lights, wind turbines etc
➤It is recommended for use with concrete mixes with cement content up to 350 kg / cu.m
SAMPLAST®-SC is a ready to use admixture formulated to achieve the highest performance level and durability of concrete meeting quality standard that prevailed in the international market as a high range water reducing admixture. It greatly improves the effectiveness of cement dispersion requiring less water for mixing and obtain concrete workability.
Advantages :
➤Flowable concrete with lowest water/cement ratio without segregation or bleeding
➤Right admixture for manufacture of self compacting concrete
➤Ideal admixture for high quality concrete due to its excellent dispersion effect
➤It works with an extremely low water/cement ratio and allows high performance concrete to increase high early (18-24 hours) and final strengths, Flexural and Tensile Strength, low permeability, high density. Increases adhesion to reinforcement
➤Reduces micro porosity
➤Very high water reducing capability
➤Increases workability, density and strength without increase in cement
➤Increases Compressive Strength of concrete with reduced water content in the mix
➤Improves surface finish, texture and durability of concrete
➤Reduces curing cycles - time and temperature
➤Less vibration and workmanship required
Method of Use :
➤Add SAMPLAST®-SC (maximum up to 2% of cement) in water and stir gently
➤For optimal concrete plasticizing effect, add SAMPLAST®-SC into concrete after 50-70% of the water has been mixed
Recommended Applications :
➤Bridge / Piles Foundation, Piers
➤Building foundations and footings, RCC load bearing structures like beams and columns
➤RCC support structures for overhead water tanks, revolving restaurants etc.
➤High-rise towers, for installation of radar systems, TV signal receivers, search lights, wind turbines etc.
SAMPLAST®-P-5 is formulated to meet the highest level of quality standard that prevailed in the international market as strong admixture to modify graded O.P.C. to attain highest degree of durability.
Advantages :
➤Reduces porosity, enhances normal life of concrete structure by 3-4 times
➤Increases density and lowers permeability which results in increased durability of concrete
➤Reduces the heat of hydration and state of art technique of forming secondary gel in cement paste, which ultimately results in formation of pores free, impermeable concrete
➤Less prone to the basic causes of corrosion due to chloride / sulphate penetration and initiation as a result of carbonation
➤High reactive silica / lime ratio makes availability of less free-lime, which reduces drastically the cause of leaching
➤Reduces alkali-aggregate reaction
Method of Use :
➤SAMPLAST®-P-5 should be used along with compatible super plasticizer in concrete mix design to attain optimum level of highly durable concrete
Recommended Applications :
➤All critical concrete structure prone to exposed corrosive atmosphere
➤All load-bearing concrete members like beams, columns, slabs, footings, piling etc.
➤Water / chemicals / effluent retaining structures / vessels, tanks etc.
SAMPLAST®-R-200 is formulated from a blend of specially selected polymer and water reducing and retarding admixture to meet the highest level of quality standard that prevailed in the international market.
Advantages :
➤Reduces micro porosity
➤Increases workability and extends setting time, thus prevents ill-effects of delays and stoppages taking place during concreting
➤SAMPLAST®-R-200 increases ultimate strength without increasing cement content or reducing workability
➤Can effect saving in cement for given Compressive Strength and workability
➤The retarding effect of SAMPLAST®-R-200 helps in avoiding cold joints
➤Thus beneficial for in-site piling, large scale concreting and step form construction
➤Improves cohesion by minimizing bleeding and segregation
➤SAMPLAST®-R-200 makes concrete dense and durable
➤It is compatible with all types of cement
Method of Use :
➤Add correct quantity of SAMPLAST®-R-200 directly to the mixer at the time of mixing water
➤If water is mixed at more than one stage, add SAMPLAST®-R-200 with the last stage
➤Under no circumstances should SAMPLAST®-R-200 be added to the dry mix
Recommended Applications :
➤High-rise towers, chimneys, buildings etc.
➤Slip form structures, tunnel, shaft lining, offshore construction and in site piles
SAMPLAST®-M-300 is a synthetic plasticizer derived from modified melamine sulfonate.
Advantages :
➤Reduces micro porosity
➤Increases workability of concrete mix without reducing Compressive Strength
➤Increases Compressive Strength of concrete mix by reducing water content of the mix
➤Increases cohesion by minimizing segregation and bleeding thereby giving better surface finish
➤Increases durability of concrete by increasing density
Method of Use :
➤Add correct quantity of SAMPLAST® M-300 directly to the mixing water
➤Prepare dry mix of cement, aggregates and sand as usual
➤Slowly add dry mix to the solution while mixing
➤Apply concrete mix as usual
Recommended Applications :
➤RCC load bearing structures like beams and columns
➤Building foundations and footings
➤RCC support structures for overhead water tanks, revolving restaurants etc.
➤High-rise towers, for installation of radar systems, TV signals receivers, search light, wind turbines etc.
SAMPLAST®-AE is supplied as a dark brown liquid with selected sugar reduced lignosulphonates in combination with compatible surface active agents. It is a chloride-free admixture used to entrain a controlled volume of air in a concrete mix whilst permitting, through its plasticizing action, significant reduction in free water content of the mix.
Advantages :
➤Improves quality
➤Increases workability and cohesion
➤Assists in producing a dense, uniform, close/textured surface, free from segregation, sand runs and surface water and improves impermeability of concrete structure and also makes it less prone to cracking
Method of Use :
➤Use of dispensing equipment is strongly recommended and wherever possible SAMPLAST®-AE should be added to the gauging water as it enters the mixer
➤The technical department should be consulted regarding suitable equipment and installation
➤A number of factors previously mentioned will affect the degree of air entrainment and once the rate of application has been established, care should be taken to ensure consistency of raw materials supplied, mixing and delivery procedures
Recommended Applications :
➤To meet the following requirements :
*Improved quality and long-term durability of concrete exposed to severe weathering conditions
*Increased resistance of concrete to damage by sea water, frost and deicing salts
*Making concrete structures less prone to cracking
*Improved cohesion and workability to concrete where poorly graded or harsh sands and aggregates have to be used to minimize bleeding
*Pumping aid to maintain cohesiveness and to minimize segregation where concrete is placed mechanically
SAMPLAST®-AC is a chloride-free accelerating and water reducing admixture.
Advantages :
➤Increases workability and strength
➤Accelerates setting and high early strength thereby improves frost resistance
➤Effective in pre-stressed and reinforced concrete
Method of Use :
➤Add the correct quantity of SAMPLAST®-AC to the mixer at the time of mixing water
➤Prepare dry mix of cement, aggregates and sand as usual
➤Slowly add dry mix to the solution while mixing
➤Apply concrete mix as usual
Recommended Applications :
➤Pre-cast concrete in stadium etc.
➤Concrete placed in cold weather
➤Concrete for repairs
➤Mortars for brick-work
SAMPLAST®-300 is a synthetic plasticizer derived from sulphonated naphthalene.
Advantages :
➤Reduces micro-porosity
➤Increases workability of concrete mix without reducing Compressive Strength
➤Increases Compressive Strength of concrete mix with reduced water content in the mix
➤Increases cohesion by minimizing segregation and bleeding thereby giving better surface finish
➤Increases durability of concrete by increasing density
➤Provides high early strength
Method of Use :
➤Add correct quantity of SAMPLAST® 300 directly to the mixing water
➤Prepare dry mix of cement, aggregates and sand as usual
➤Slowly add dry mix to the solution while mixing
➤Apply concrete mix as usual
Recommended Applications :
➤RCC load bearing structures like beams and columns
➤Building foundations and footings
➤RCC support structures for overhead water tanks, revolving restaurants etc.
➤High rise towers, for installation of radar systems, TV signals receivers, search light, wind turbines etc.
SAMPLAST®-150-SP, as a normal water reducing admixture, is formulated to meet the highest level of quality standard that prevailed in the international market.
Advantages :
➤Reduces micro porosity
➤Increases workability, density and strength without increase in cement
➤Increases Compressive Strength of concrete mix with reduced water content in the mix
➤Effects savings in cement consumption without affecting quality
Method of Use :
➤Add SAMPLAST®-150-SP (maximum up to 1.5% of cement) in water and stir gently
➤Prepare dry mix of cement, aggregates and sand as usual
➤Slowly add dry mix to the solution while mixing
➤Apply concrete mix as usual
Recommended Applications :
➤RCC load bearing structures like beams and columns
➤Building foundations and footings
➤RCC support structures for overhead water tanks, revolving restaurants etc.
➤High rise towers, for installation of radar systems, TV signal receivers, search lights, wind turbines etc.
➤It is also recommended for use with concrete mix design M25 and above
SAMPLAST®-150, as a normal water reducing admixture, is formulated to meet the highest level of quality standard that prevailed in the international market.
Advantages :
➤Reduces micro porosity
➤Increases workability, density and strength without increase in cement
➤Increases Compressive Strength of concrete mix with reduced water content in the mix
➤Effects savings in cement consumption without affecting quality
Method of Use :
➤Add SAMPLAST®-150 (150 gm per 50 kg of cement) in water and stir gently
➤Prepare dry mix of cement, aggregates and sand as usual
➤Slowly add dry mix to the solution while mixing
➤Apply concrete mix as usual
Recommended Applications :
➤RCC load bearing structures like beams and columns
➤Building foundations and footings
➤RCC support structures for overhead water tanks, revolving restaurants etc.
➤High-rise towers, for installation of radar systems, TV signal receivers, search lights, wind turbines etc.
➤It is also recommended for use with concrete mix having cement content up to 350 kg / cu.m
SAMPLAST®-100 is formulated to meet the highest level of quality standard that prevailed in the international market as a water reducing and retarding admixture.
Advantages :
➤Increases workability and Compressive Strength
➤Increases durability by increasing density and lowering permeability
Method of Use :
➤Add SAMPLAST®-100 (100 gm per 50 kg of cement) in water and stir gently
➤Add dry mix to the solution while mixing
➤SAMPLAST®-100 is recommended for use with concrete mix with cement content up to 350 kg / cu. mtr.
Recommended Applications :
➤RCC load bearing structures like beams and columns
➤Building foundations and footings
➤RCC support structures for overhead water tanks, revolving restaurants etc.
➤High-rise towers for installation of radar systems, TV signal receivers, search lights, wind turbines etc.
➤Concrete mix having cement content up to 350 kg / cu.m