PRODUCT INFORMATION

Tile Adhesives & Grouts

.

  • Tile Grout, Epoxy-base: SAMTILE-JME

    Tile Grout, Epoxy-base: SAMTILE-JME

    SAMTILE-JME is a three-component epoxy grout used for gaps of 2 to 15mm on floors and walls with glass mosaic, ceramic tile, vitrified tile, marble and stone. It provides a lasting chemical and mechanical performance of high resistance coverings. Sealed membrane is hard-wearing, hygienic yet attractive with cosmetic finish. Available in various glittering and non-glittering shades.

    Advantages :

    SAMTILE®-JME is used for grouting of joints up to 12mm, between vitrified/ceramic tiles, panels, mosaic for walls, floors, indoors and outdoors

    It is victual-proof

    High in plasticity, elasticity, water resistance and adherence

    Provides aesthetic look to malls, showrooms, offices, bathrooms and houses

    Method of Use :

    Mix 0.2 kg of SAMTILE-JME part 1 with 0.1 kg of SAMTILE-JME part 2 thoroughly and add 0.7 kg SAMTILE-JME part 3 to achieve a homogeneous mix

    Grout joints with the mortar

    Spillages can be cleaned by means of a soft sponge and water about 5-15 minutes after application


    Recommended Applications :

    Grouting joints between vitrified/ceramic tiles, panels, mosaics for walls, floors, indoors and outdoors

  • Tile Adhesive, Type 1: SAMTILE-GP

    Tile Adhesive, Type 1: SAMTILE-GP

    SAMTILE-GP is a water and frost resistant Tile Adhesive, Type 1, with BIS Certification Mark. It is used by thin bed method. Due to its very high creep strength, heavy tiles and slabs can be placed downwards. To increase its elasticity, water resistance and adhesion, add SAMTILE-AE.

    Advantages :

    It is victual-proof

    Resists to water and frost

    For application on areas with higher static or thermal stress like heat-prone floor, prefabricated concrete, terraces, swimming pools or facades, use SAMTILE-AE as additive to SAMTILE-GP

    Not recommended for wooden, metal or plastic ground surfaces

    Method of Use :

    Mix thoroughly 5 kg of SAMTILE-GP with 1.4 litres of water to a homogenous consistency

    Mix again after 15 minutes and it is ready for application


    Recommended Applications :

    Fixing tiles, panels, slabs, mosaic, non-fatty natural stones, construction and insulating panels

    Living quarters, shower and bathrooms, swimming pools, terraces and facades

  • Tile Grout, Cementitious: SAMTILE-JM

    Tile Grout, Cementitious: SAMTILE-JM

    SAMTILE-JM is a ready to use tile grout based on cement and special additives.

    Advantages :

    Ideal for grouting of joints up to 7mm between ceramic tiles, panels, mosaic on walls and floors both indoors and outdoors

    It is victual-proof

    To increase its plasticity, elasticity, water resistance and adherence, use a special synthetic dispersion product, SAMTILE-AE

    Method of Use :

    Mix 5 kgs of SAMTILE-JM with approximate 1.5 liter of water

    Stir again after 15 minutes

    It is applied by means of a rubber-trowel diagonal to the joint

    Spillages can be cleaned by means of a soft sponge and water about 5-15 minutes after application


    Recommended Applications :

    Grouting of joints between ceramic tiles, panels, mosaics for walls, floors, indoors and outdoors

  • Tile Adhesive, White Color: SAMTILE-GMA

    Tile Adhesive, White Color: SAMTILE-GMA

    SAMTILE-GMA is victual-proof, water and frost resistant tile adhesive. It is used by thin bed method. Due to its very high creep strength, heavy tiles and slabs can be placed downwards. To increase its elasticity, water resistance and adhesion, add SAMTILE-AE.

    Advantages :

    It is victual-proof

    Resistant to water and frost

    For application on areas with higher static or thermal stress like heat-prone floor, prefabricated concrete, terraces, swimming pools or facades, use SAMTILE-AE as additive to SAMTILE-GMA

    Not recommended for wooden, metal or plastic ground surfaces

    Method of Use :

    Mix thoroughly 5 kg of SAMTILE-GMA with 1.4 liters of water to a homogenous consistency

    Mix again after 15 minutes and t is ready for application


    Recommended Applications :

    Fixing tiles, panels, slabs, mosaic, non-fatty natural stones, construction and insulating panels

    Living quarters, shower and bathrooms, swimming pools, terraces and facades

  • Tile Adhesive, Type 2: SAMTILE-AM

    Tile Adhesive, Type 2: SAMTILE-AM

    SAMTILE-AM is a victual-proof, water and frost resistant Tile Adhesive, Type 2, with BIS Certification Mark. It is used by thin bed method. Due to its very high creep strength, heavy tiles and slabs can be placed downwards. To increase its elasticity, water resistance and adhesion, add SAMTILE-AE.

    Advantages :

    It is victual-proof

    Resistant to water and frost

    For application on areas with higher static or thermal stress like heat-prone floor, prefabricated concrete, terraces, swimming pools or facades, use SAMTILE-AE as additive to SAMTILE-AM

    Not recommended for wooden, metal or plastic ground surfaces

    Method of Use :

    Mix thoroughly 5 kg of SAMTILE AM with 1.4 litres of water, to a homogenous consistency

    Mix again after 15 minutes and it is ready for application


    Recommended Applications :

    Fixing tiles, panels, slabs, mosaic, non-fatty natural stones, construction and insulating panels

    Living quarters, shower and bathrooms, swimming pools, terraces and facades

Copyright © 2010 Samrock Chemicals (I) Ltd. All rights are reserved.
Design and Developed by Real Infoware Pvt. Ltd.