.
SAMBOND® CF is a one component (Ready to use), flexible crack filling compound recommended for repair in concrete.
SAMHARD-STD, a non-rusting, monolithic Floor Hardener, with Compressive Strength of minimum 500 kg/cm2, consists of special hard wearing aggregates which have been selected for their physical properties of abrasion and wear resistance as well as shape & size.
Advantages :
➤Abrasion resistance is approximately three times that of normal concrete
➤Hard wearing aggregates provide properties of abrasion and wear-resistant hard surface
➤Provides a dense and non-porous surface
➤Forms monolithic-bond with base concrete
➤Resistant to oils and greases
➤It is dust-proof and provides non-slippery surface
Method of Use :
➤SAMHARD-STD is applied in two application stages
➤SAMHARD-STD is evenly broadcast onto the concrete surface and floated immediately when it becomes uniformly dark by absorption of moisture from the concrete
➤Immediately thereafter, SAMHARD-STD is thrown evenly over the surface for the second time
➤Again, after absorption of moisture, the surface can be floated in the same way as before
➤Final finishing of the floor using blades of a power float can be carried out when the floor has stiffened sufficiently
Recommended Applications :
➤Industrial areas subjected to heaviest traffic like loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways etc.
➤Industrial flooring in areas like breweries, food processing, dairies, tanneries, power stations, chemical refineries, metal plating, air craft hangers, hospitals, laboratories etc.
SAMHARD, a non-rusting, monolithic Floor Hardener, with Compressive Strength of minimum 700 kg/cm2, consists of special hard wearing aggregates which have been selected for their physical properties of abrasion and wear resistance as well as shape & size.
Advantages :
➤Hard wearing aggregates provide properties of abrasion and wear resistant hard surface
➤Provides a dense and non-porous surface
➤Forms monolithic bond with base concrete
➤Resistant to oils and greases
Method of Use :
➤SAMHARD is applied in two application stages
➤SAMHARD is evenly broadcast onto the concrete surface and floated immediately when it becomes uniformly dark by absorption of moisture from the concrete
➤Immediately thereafter, SAMHARD is thrown evenly over the surface for the second time
➤Again after absorption of moisture, the surface can be floated in the same way as before
➤Final finishing of the floor using blades of a power float can be carried out when the floor has stiffened sufficiently
Recommended Applications :
➤Industrial areas subjected to heaviest traffic like loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways etc.
➤Industrial flooring in areas like breweries, food processing, dairies, tanneries, power stations, chemical refineries, metal plating, air craft hangers, hospitals, laboratories etc.